Indesit w1235s

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit w1235s

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 28, 2008 at 4:38 pm #36354
    simonb
    Participant

    fault reported by customer is stuck on wash, customer uses program 8 daily wash, checked heater ok, check heater thermistor for open circuit only ok, it fills, washer drains, spins ok,

    notice the customer has temperature dial set on 90oC by mistake, but im pretty sure daily wash would overide it and impulse on anyway?

    i suspected heater relay but doesent the timer pick up on heater relay stuck and go into fault mode?

    simon

    April 28, 2008 at 4:47 pm #250734
    iadom
    Moderator

    Re: Indesit w1235s

    Is the heater actually switching on and drawing current on any wash programme?

    Jim.

    PS. Are you sure about that model number????

    April 28, 2008 at 9:19 pm #250735
    simonb
    Participant

    Re: Indesit w1235s

    Thanks for reply Jim,

    Not done current test just resistance on heater element i know with heaters there mostly either working or there not at all, but im not too sure if the thermistors go out of calibration/range??
    Thanks Simon

    April 29, 2008 at 7:54 am #250736
    kiddo66
    Participant

    Re: Indesit w1235s

    It sounds like the machine is going into a time out(like when you get 1 minute on the Hotpoints)It could be pump problem or heater circuit.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.