Brandt Dishwasher similar to Hotpoint BF41 hinge assy

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Brandt Dishwasher similar to Hotpoint BF41 hinge assy

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • April 29, 2008 at 7:32 pm #36391
    bobokines
    Participant

    Hi. I have a brandt built Hygena dishwasher. The model number is missing but I am sure that the same parts are fitted to a Hotpoint BF41

    I need the part number for the fixing bracket that the door hinge straps connect to. It’s the rounded corner unit that lives in the top front corners. I can’t work out what they might be called.

    I have a photo if needed.

    Also I need some adjustable legs.

    Brandt part numbers would be prefered as they are likely to be cheaper and easier to aquire than the hotpoint ones.

    Many thanks

    Bob

    April 29, 2008 at 8:14 pm #250833
    Penguin45
    Participant

    Re: Brandt Dishwasher similar to Hotpoint BF41 hinge assy

    Curvy plastic thingy?

    31X9034 – Gutter – R
    31X9035 – Gutter – L
    31X6067 – Black plastic leg.

    Chris.

    April 29, 2008 at 8:52 pm #250834
    bobokines
    Participant

    Re: Brandt Dishwasher similar to Hotpoint BF41 hinge assy

    Penguin45 wrote:Curvy plastic thingy?

    .

    Er…No Curvy metal thing…


    It’s the bit on top front corners that the door spring adjustments clip onto

    Bob

    April 29, 2008 at 8:56 pm #250835
    Penguin45
    Participant

    Re: Brandt Dishwasher similar to Hotpoint BF41 hinge assy

    Oh – hinge kit then – 32X0611 – a whole bag of goodies from Masterpart at £16. Says left and right hand.

    Chris.

    April 29, 2008 at 9:25 pm #250836
    bobokines
    Participant

    Re: Brandt Dishwasher similar to Hotpoint BF41 hinge assy

    Thanks Chris…

    I am sure I have been here before. I seem to remember I couldn’t find the part before.

    I’ll order the kit and see what turns up.

    Thanks again

    Bob

    April 30, 2008 at 4:42 am #250837
    bobokines
    Participant

    Re: Brandt Dishwasher similar to Hotpoint BF41 hinge assy

    Just to be sure, this is the bit I need…

    bob

    April 30, 2008 at 8:21 am #250838
    Penguin45
    Participant

    Re: Brandt Dishwasher similar to Hotpoint BF41 hinge assy

    Yes – it’s all bracketed together as a kit.
    Chris.

    April 30, 2008 at 8:29 am #250839
    goosegreen
    Participant

    Re: Brandt Dishwasher similar to Hotpoint BF41 hinge assy

    I have fitted a couple of the 32X0611 kits and they don’t come with the brackets. Not sure about the brackets but the adjusters are NLA.

    Goose

    April 30, 2008 at 10:28 am #250840
    eastlmark
    Moderator

    try 32×3622 hinge accessory kit, connect have a picture.

    April 30, 2008 at 4:25 pm #250841
    bobokines
    Participant

    Re: Brandt Dishwasher similar to Hotpoint BF41 hinge assy

    Thanks Mark. That’s the one :tup:


    Great stuff

    Bob

    May 7, 2008 at 8:01 pm #250842
    bobokines
    Participant

    Re: Brandt Dishwasher similar to Hotpoint BF41 hinge assy

    Anybody else able to help here please.

    The brackets are no longer included in the 32×3622 hinge accessory kit 😥

    I am sure that they are the same part as used in the GDA BF41 range.

    I wonder if there is a Hotpoint part number?

    Thanks in anticipation

    Bob

    May 7, 2008 at 9:53 pm #250843
    iadom
    Moderator

    Re: Brandt Dishwasher similar to Hotpoint BF41 hinge assy

    Have sent you a picture, looks like you are out of luck Bob. 😥

    Jim.

    May 7, 2008 at 10:05 pm #250844
    bobokines
    Participant

    Re: Brandt Dishwasher similar to Hotpoint BF41 hinge assy

    Thanks Jim.

    I might be able to get the wire clip to fit on one side and achieve the adjustment for the door weight on the other hinge.

    Thanks again

    Bob

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.