Dishwasher is not draining – have removed filters and cleaned – removed drain pipe and it will drain into a bucket when pipe low enough – so its clear – it did restart and water ran straight out down the drain – therefore I take it the drain pump is u/s – what do you think and is it relatively easy to change? See they are about £25 on the interweb
Have tried to start it again and after a couple of minutees I’m getting an audible alrm – 2 beeps and the selected program led is flashing??
Before you order anything………:wink:
Take the pump off and check it’s not jammed with anything. Fragments of glass, bone and pips can stop the pump giving the impression of failure. If the pump is clear, then it is probably U/S.