ind d/washer Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ind d/washer This topic has 4 replies, 3 voices, and was last updated 17 years, 11 months ago by dopper. Viewing 5 posts - 1 through 5 (of 5 total) Author Posts May 9, 2008 at 10:56 am #36618 dopperParticipant got a ind dv620kixuk dishwasher it was leaking the leak was coming from the sump where a switch had come out what i need is a clip that keeps this switch in place, its to small for a jub clip anyone help paul May 9, 2008 at 3:13 pm #251703 bzz67Participant Re: ind d/washer not sure which switch your refering to, but a zip tie can sometimes replace a hose clip with good results. May 9, 2008 at 3:14 pm #251704 iadomModerator Re: ind d/washer Not if you use a very small jubilee clip, they do make them small enough, have refitted two or three of these doofers. I’m assuming its the little switch that fits into the side of the hose that goes to the bottom spray arm. Plastic cable ties are OK if you want to run the risk of it blowing off and flooding again. 😉 Jim. May 12, 2008 at 11:31 am #251705 dopperParticipant Re: ind d/washer tried the ties kept dripping May 12, 2008 at 3:23 pm #251706 iadomModerator Re: ind d/washer They do make jubilee clips small enough for this job, honest. 😉 jim. Author Posts Viewing 5 posts - 1 through 5 (of 5 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In