Bosch HBN245BGB/02 Oven door.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch HBN245BGB/02 Oven door.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 13, 2008 at 5:05 pm #36700
    iadom
    Moderator

    Oven door was on the floor when I called to this machine. The small metal locking latch on one hinge had come adrift.

    I refitted it and then slid the door back into place. However it doesn’t always close properly, sometimes it is ajar about an inch. If I open and close it a few times I can get it to close but it does not seem positive.

    Is this likely to be faulty/worn hinges or the guides they slot into.

    I did notice the door drops down below horizontal when opened fully.

    Jim.

    May 13, 2008 at 5:19 pm #251987
    gegsy
    Participant

    Re: Bosch HBN245BGB/02 Oven door.

    Possibly hinges but these have a nasty habit of spring snapping.
    My guess is that one of the hinges springs has snapped.
    I would IMHO change both hinges and receivers due to age 😀

    Hinges 643913 for both sides
    Receivers 187963 for both sides

    Greg

    May 13, 2008 at 5:39 pm #251988
    iadom
    Moderator

    Re: Bosch HBN245BGB/02 Oven door.

    Thanks Greg. Both hinge springs appear to be very strong.
    :tup:
    Jim.

    May 13, 2008 at 6:12 pm #251989
    iadom
    Moderator

    Re: Bosch HBN245BGB/02 Oven door.

    Is that number for the hinges correct?

    Just checked on the BSH website and it shows 068487 & 068488 for the hinges, almost £37 each 😯

    Jim.

    May 13, 2008 at 6:17 pm #251990
    gegsy
    Participant

    Re: Bosch HBN245BGB/02 Oven door.

    Part change Jim , part change, same for receivers also 😆
    Price is about right but may come as a pair, showing as 1 unit whether thats 1 unit or 1 unit of 2 😯 😕

    Greg

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.