zanussi DE6744

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › zanussi DE6744

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • May 19, 2008 at 4:36 pm #36832
    Latham63
    Participant

    This machine starts up,drain pump working and humming from intake valve as if asking for water.No water comes in.Coils ok.Water supply ok.After a few minutes prog.light and dry cycle light flash repeatedly and consistently?? Vot can this mean???

    May 19, 2008 at 8:28 pm #252507
    Penguin45
    Participant

    Re: zanussi DE6744

    It means you need to read THIS. Yours is the IWMS machine.

    Penguin45.

    May 21, 2008 at 12:38 pm #252508
    Latham63
    Participant

    Thanks Mr.Penguin,more sound advice from The Guru!!

    February 2, 2009 at 10:09 pm #252509
    martin_d
    Participant

    Re: zanussi DE6744

    I’m convinced this is what is wrong with my dishwasher, however I can’t get the side panel fully off to see the IWMS. I have taken the screws at the back off, and one on the side under the top. Is brute force now required to prize the panel off, or have I missed a screw?

    February 3, 2009 at 12:24 am #252510
    Penguin45
    Participant

    Re: zanussi DE6744

    There are retaining screws behind the kick panel. That’s held by two screws. Get rid of that, then you can access them. Once undone, it’s a lift and pull to release the panel.

    Penguin45.

    February 3, 2009 at 7:53 am #252511
    martin_d
    Participant

    Re: zanussi DE6744

    Penguin45 wrote:There are retaining screws behind the kick panel. That’s held by two screws. Get rid of that, then you can access them. Once undone, it’s a lift and pull to release the panel.

    Penguin45.

    Cheers, got the panel off now. Just trying to work out how to remove the unit ❓

    February 3, 2009 at 8:47 am #252512
    martin_d
    Participant

    Re: zanussi DE6744

    Got the unit out!. Now how do I get it open to clean all the gunge out?

    February 3, 2009 at 11:33 am #252513
    martin_d
    Participant

    Re: zanussi DE6744

    well, I think I have broken it. :rolls: I popped the plug off to get rid of what I though twas brown gunk, when it seems it is in fact the water softner. I have hosed all of this out now, and the plug will not go back on. Any suggestions how I can rescue the situation?

    Thanks

    February 3, 2009 at 7:10 pm #252514
    Penguin45
    Participant

    Re: zanussi DE6744

    THIS is required……….

    Penguin45.

    March 7, 2009 at 5:09 pm #252515
    janboy
    Participant

    Re: zanussi DE6744

    great post .i have just done mine , washed it out gently and now working fine 😆

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.