Hoover HW6316M NDA

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover HW6316M NDA

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 21, 2008 at 9:00 pm #36881
    Turbo
    Participant

    This washer dryer has no drum action, motor ok so suspect one of the two modules. Is it likely to be the large control module at the top of machine or the small module near the motor? Would normally go for the small module but I did hear a relay clicking noise coming from the large control module when I tried a wash program 😕
    Any help would be great.
    Thanks, Graham.

    May 21, 2008 at 9:29 pm #252655
    simonb
    Participant

    Re: Hoover HW6316M NDA

    iv had dry joints on the top board on hoover machines worth removing to check track side simon

    May 21, 2008 at 11:42 pm #252656
    Penguin45
    Participant

    Re: Hoover HW6316M NDA

    Small board is the dryness module on this washer dryer. Fault can only be motor/wiring/core board. Cehck for burnt out joint around the relays.

    Chris.

    May 22, 2008 at 8:41 pm #252657
    Turbo
    Participant

    Re: Hoover HW6316M NDA

    Thanks for the help,it was indeed a dry joint on the relay.
    Graham

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.