beko wm1210s

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › beko wm1210s

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 7, 2008 at 6:02 pm #37244
    fasetester
    Participant

    hi guys went to repair a beko eco care washing machine model wm 1210s problum not spinning. checked filter pump motor brushes pressure switch clicking when blew into it. not spinning on any of the spin programs A B C just keeps pumping out the drum would turn slightly as if it was going to spin would this be a board fault or can the machine be reset. thanks fasetester.

    June 7, 2008 at 6:17 pm #254060
    Penguin45
    Participant

    Re: beko wm1210s

    Board fault. It’s behind the front panel. They fail for no reason, often explosively. The part number is 2802090200. I have no idea how much your wholesaler will charge you for it.

    Chris.

    June 7, 2008 at 7:17 pm #254061
    fasetester
    Participant

    Re: beko wm1210s

    thanks chris is the board not down beside the pump. is it usal to be able to repair the board thanks fasetester.

    June 7, 2008 at 7:27 pm #254062
    Penguin45
    Participant

    Re: beko wm1210s

    Board is behind the front panel above the pump. Front comes off with two screws at the bottom.

    QER does re-con boards.

    Chris.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.