Fisher & Paykel MW058 Washing machine problem

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › Fisher & Paykel MW058 Washing machine problem

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 12, 2008 at 10:34 am #37335
    nigb
    Participant

    Hi, above machine is beeping with short wash & spin lights on after I press start button. Any help or indication of problem appreciated
    thanks
    Nigb

    June 12, 2008 at 10:58 am #254462
    nigb
    Participant

    Re: Fisher & Paykel MW058 Washing machine problem

    sorry left off diagnostic fault code which is 9.

    June 12, 2008 at 10:04 pm #254463
    nigb
    Participant

    Re: Fisher & Paykel MW058 Washing machine problem

    Managed to clear fault 9 but now have fault 136?

    June 13, 2008 at 12:06 am #254464
    Penguin45
    Participant

    Re: Fisher & Paykel MW058 Washing machine problem

    Motor stalled – wiring, rotor position sensor, drum bearings seizing, faulty pcb all possible.

    Penguin45.

    June 13, 2008 at 12:31 pm #254465
    nigb
    Participant

    Re: Fisher & Paykel MW058 Washing machine problem

    thanks for the answer -I’ll let you know what eventuates

    June 29, 2008 at 12:53 pm #254466
    nigb
    Participant

    Re: Fisher & Paykel MW058 Washing machine problem

    I discovered on checking wiring to motor that I had an open circuit between 2 of the phases. Further investigation revealed one of the connectors had broken off the motor stator & causing a short circuit which had damaged stator beyond repair. Fortunately local spare parts guy had a 2nd hand stator ($30) which along with new position sensor ($70) had machine up & running like new.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.