Whirlpool top loader

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool top loader

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 16, 2008 at 4:21 pm #37421
    williemac
    Participant

    Model number3rlsQ8000jQ5
    Machine is draining ok washing ok but is not doing final spin,gearbox seems ok motor seems ok has anyone came across this problem before thanks?

    June 16, 2008 at 7:38 pm #255061
    msappliance
    Participant

    Re: Whirlpool top loader

    i think this machine has a plastic link between motor and gearbox. this link breaks.
    remove pump then motor and you should see 2x 3 legged peice of plastic joined by rubber mount check for wear.

    June 16, 2008 at 7:49 pm #255062
    Penguin45
    Participant

    Re: Whirlpool top loader

    THIS should be what you need.

    Chris.

    June 16, 2008 at 9:03 pm #255063
    williemac
    Participant

    Re: Whirlpool top loader

    changed gearbox,motor and coupling drive (link) still no joy.any other suggestions thanks

    June 17, 2008 at 11:51 am #255064
    bzz67
    Participant

    Re: Whirlpool top loader

    had one once that got me for a while, the drum was dropping down and touching ther outer tub. the cylinder clamp between drum and shaft had worn the top lip clean off, because i had never seen this before i could’nt see the fault.
    hope this helps!

    June 20, 2008 at 9:35 am #255065
    electrofix
    Moderator

    Re: Whirlpool top loader

    when you say you changed the box does this include the spin clutch on top of the box had a few of these fail

    Dave

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.