Zanussi zx99/5si

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › Zanussi zx99/5si

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • June 19, 2008 at 4:33 pm #37504
    nolights
    Participant

    Hi can any one help me , where can i find the switch that operates the lights in the fridge , bulbs have been replaced , the fridge works but no lights..


    thanks

    Nolights

    June 19, 2008 at 11:34 pm #255335
    helo_75
    Participant

    its on a magnet on the pcb isnt it?

    generally, if youve changed the bulb, and it still aint working, itll need a pcb

    June 20, 2008 at 11:17 am #255336
    nolights
    Participant

    Re: Zanussi zx99/5si

    many thanks for the reply , i will have a look and update everyone

    paul

    June 20, 2008 at 12:43 pm #255337
    nolights
    Participant

    Re: Zanussi zx99/5si

    I have taken the pcb out, checked the magnetic reed switch that works on it turns the dial lighting off and on , looking at the pcb the power tracks for the interior lights go fron the connector on the righthand side of the pcb to the left via two link wires across the pcb to the large connector on the pcb , which then goes off into the top of the fridge via a ribbon cable . the voltagew across the two link wires is 53v ac . any ideas where the ribbon cable goes too . Has anyone got a circuit diagram for this beast please.

    regards

    nolights ..paul

    June 20, 2008 at 1:19 pm #255338
    helo_75
    Participant

    theres another pcb on the back, near the compressor

    thats where the ribbon cable goes to, i suspect

    June 20, 2008 at 2:07 pm #255339
    nolights
    Participant

    Re: Zanussi zx99/5si

    many thanks , will have a look over the weekend

    June 20, 2008 at 5:35 pm #255340
    nolights
    Participant

    Re: Zanussi zx99/5si

    it looks like th3 has blown apart on the pcb this is surface mount , i cannot identify the component as not enough left of it ,
    so it seems like a new pcb OUCH

    June 20, 2008 at 6:42 pm #255341
    helo_75
    Participant

    Re: Zanussi zx99/5si

    harsh i know, but thats the way things are going im afraid 🙁

    June 21, 2008 at 8:10 am #255342
    nolights
    Participant

    Re: Zanussi zx99/5si

    hi
    Has anyone got an old main pcb , i am trying to repair my pcb i need to now the componet TH3 , which is near the ribbon connector or can you send me the old pcb if this part is still intact i will pay postage costs,

    June 27, 2008 at 12:35 pm #255343
    cockney steve
    Participant

    Try a good electronics engineer(try a one-man tv&radio repairer) -explain what the board does, he’ll possibly know what sort of device it is, and an acceptable substitute.

    Whether it’s cost-effective, is another issue!

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.