ISE5/2

Home › Forums › Manufacturer/WP/Insurer Specific Forums › ISE Trade Support Forum › ISE5/2

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • June 24, 2008 at 2:23 pm #37602
    euro
    Participant

    Had a customer on the phone saying that the machine washes ok but at the end of the wash it sits and makes funny noises, by what the customer says the drain pump tries to start up also it sounds like its going to fill up with water. All this goes on for about 5 mins or so then it stops and you can open the door then. Anyone got any ideas what might be causing this.

    Thanks

    Andy

    June 24, 2008 at 2:28 pm #255776
    bazza500
    Participant

    Re: ISE5/2

    interlock. Had it before.

    June 24, 2008 at 2:32 pm #255777
    euro
    Participant

    Re: ISE5/2

    That was quick Bazza, cheers

    Andy

    June 24, 2008 at 9:54 pm #255778
    iadom
    Moderator

    Re: ISE5/2

    Interesting, when you say ‘had it before’ bazza do you mean on ISE5 mk 2 or a similar Vestel machine?

    Jim.

    June 24, 2008 at 11:10 pm #255779
    Penguin45
    Participant

    Re: ISE5/2

    ISE2 will pulse the valves with a dodgy d/int – had a Ballack doing it a while ago as well.

    Chris.

    June 24, 2008 at 11:15 pm #255780
    bazza500
    Participant

    Re: ISE5/2

    Hi Jim,
    Had it on the very first ISE2 I sold.

    June 25, 2008 at 9:06 am #255781
    iadom
    Moderator

    Re: ISE5/2

    Thanks for that info, every little helps. 8)

    Jim.

    June 25, 2008 at 9:10 am #255782
    timdowning
    Participant

    Re: ISE5/2

    I had a bulletin from Servis the other day stating this problem and changing the door lock will rectify it.

    July 3, 2008 at 2:21 pm #255783
    euro
    Participant

    Re: ISE5/2

    Just a note of thanks to Ken and Sean for your very quick response to getting the part sent out ( it arrived the next morning in post and you know how late in the day it was ordered) for this job and to all the other lads for your input. They were one very happy customer to get it repaired as soon as it was, along with that they said its the best machine they have ever had 😀

    Thanks

    Andy

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.