- This topic has 4 replies, 3 voices, and was last updated 17 years, 9 months ago by
.
-
Posts
-
i think this is a cda appliance.
fault 4 showing
i need to know what could the most common cause be if its the ows that is faulty sensor where is it and can it be cleaned by hand?
any help will be great, thanks.Re: Diplomat adp8322
can someone please tell me what the o w s sensor looks like and how to remove it, thanks, mike
Re: Diplomat adp8322
Hi,
Have had a few problems with this fault on this machine myself lately.
If you are talking about the where abouts of the water sensor/indicator/pressure switch (not sure what correct term is) then its as follows. Remove filter and metal mesh from sump inside m/c. Look in the sump at 3 o’clock and you will see small black plastic grill. This is it. To remove it you have to get under sump and it just twists off like bosch drain pump. You will see it is just a rubber diaphram that pushes a micro switch. Check switch. You can take the diaphram out and carefully clean it. In the case of mine although the thing looked clean it felt sticky and greasey which was causing it to stick so machine thought it still had water in it when it didn’t. Or if you dont want to mess about, just replace it.Hope this helps
Subs
- You must be logged in to reply to this topic.