ADP8352 Diplomat dishwasher

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › ADP8352 Diplomat dishwasher

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • June 24, 2008 at 9:00 pm #37621
    madtony
    Participant

    The first 2 lights on the programme Indicator starts flashing and the machine starts bleeping after about a minute of the machine starting a programme any ideas?

    June 24, 2008 at 9:09 pm #255839
    Penguin45
    Participant

    Re: ADP8352 Diplomat dishwasher

    No fill detected in the time allowed.

    Check that water is on and that fill hose is not trapped, nipped or kink. Possible that valve has failed, or that the pcb is not actually switching it on.

    Penguin45.

    January 10, 2009 at 12:17 pm #255840
    Lucas
    Participant

    Re: ADP8352 Diplomat dishwasher

    Penguin45 wrote:No fill detected in the time allowed.

    Check that water is on and that fill hose is not trapped, nipped or kink. Possible that valve has failed, or that the pcb is not actually switching it on.

    Penguin45.

    Hi I have the same problem and have checked the water and fill hose, they are fine. Is there a way to test the valve and/or pcb?

    Thanks for your help. Great forum.

    January 10, 2009 at 12:24 pm #255841
    Lucas
    Participant

    Re: ADP8352 Diplomat dishwasher

    Forgot to mention that there is water entering the dishwasher but just not enough i guess.

    Many thanks

    January 10, 2009 at 9:49 pm #255842
    Penguin45
    Participant

    Re: ADP8352 Diplomat dishwasher

    If there is water entering the machine, the valve is working……..

    Check hose /valve filter is not crudded up, fill hose not kinked, machine is not syphoning.

    Penguin45.

    January 10, 2009 at 10:49 pm #255843
    Lucas
    Participant

    Hi Penguin.

    The fill hose to the machine is working fine and the valve filter did not look blocked.

    The machine is only a year old but in a hard water area. I will investigate further.

    Thanks again.

    January 11, 2009 at 9:53 pm #255844
    Lucas
    Participant

    Cleaned the valve and managed to get a cycle to start and water to enter the machine. Worked for about 10 minutes then multiple beeping and the two program lights on the very left flash like before.

    Any ideas? What is the pcb?

    Many thanks

    January 12, 2009 at 8:09 am #255845
    martinm
    Participant

    Re: ADP8352 Diplomat dishwasher

    sound like it could be the pcb then

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.