- This topic has 4 replies, 3 voices, and was last updated 17 years, 9 months ago by
.
-
Posts
-
Re: Asko d1876 dishwasher error codes ?
Sorry, have had a look at my technical stuff here but can see nothing on error codes for that model.
Thanks for that,the pcb has been on bench for a few days, put it back in, guess what its ok now, must have reset itself somehow
Re: Asko d1876 dishwasher error codes ?
Couple of things to bear in mind here, mainly that “Error codes” are not a “magic bullet” to the fix. It’s always worth trying to work out what was happening at the point of failure – was it filling/emptying/heating, for instance. Do you need a code if you find the dishwasher stopped full of water? Logic would suggest a drain failure…… Also, bear in mind that some of the cheap tat we have to work with over here tell lies!
Secondly, the simple act of removing and replacing the connectors on a pcb can clean the contacts and restore circuits. “Wet” appliances suffer from dampness and oxidisation simply from their environment.
Penguin45.
Thanks, was aware of most of what you have said.
had me stumped as could not find anything obviously wrong, may have just been a connector, although i had allready reseated these a few times with no effect.When i get real desperate with somthing like this I usually short circuit all the pins by putting the pcb on a piece of tinfoil and pressing hard, hopefully disharging whatever is keeping the code on, sometimes works wonders
- You must be logged in to reply to this topic.