True Manufacturing Co. Display drinks fridge thermostat

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › True Manufacturing Co. Display drinks fridge thermostat

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • July 9, 2008 at 8:38 pm #37998
    whiskeyjack6058
    Participant

    I have been out to one of these True manufacturing Co display drinks fridges.
    This one is promoting Coca Cola and its model number is: GDM-23.
    It is in need of a thermostat as the one on it is freezing up.
    Not sure what stat I need and if its an air stat or not? I don’t think it is as the stat fitted has it’s capillary tube pushed into a thin copper tube by what seems to be the evaporator.
    Never done one of these, would like to learn more especially considering this one is sat in my local fish and chip shop with one of my adverts hung up on the notice board 🙂
    Any advice is much appreciated!
    Thanks,
    Rob.

    July 9, 2008 at 8:40 pm #257364
    whiskeyjack6058
    Participant

    Re: True Manufacturing Co. Display drinks fridge thermostat

    Oh,……………. forgot to mention, the thermostat that is on it is just a normal VT9 domestic fridge stat which another engineer fitted to no avail.

    July 9, 2008 at 9:51 pm #257365
    admin
    Keymaster

    Re: True Manufacturing Co. Display drinks fridge thermostat

    Hi

    Its a air stat that is required.
    It shouldnt be fitted into the evaperator.

    Bryan

    July 9, 2008 at 9:53 pm #257366
    whiskeyjack6058
    Participant

    Re: True Manufacturing Co. Display drinks fridge thermostat

    Ok Bryan, do you have any idea where the stat sensor goes?

    Thanks,
    Rob.

    July 9, 2008 at 9:57 pm #257367
    admin
    Keymaster

    Re: True Manufacturing Co. Display drinks fridge thermostat

    Hi

    Anywhere below the air flow from the fan

    bryan

    July 9, 2008 at 10:04 pm #257368
    whiskeyjack6058
    Participant

    Re: True Manufacturing Co. Display drinks fridge thermostat

    when I was there looking at it todat, I had to remove the stat from a detachable plate fitted to the top of the cooler. It would seem there is no fixing for the stat to go????

    http://www.truemfg.com/CC_catalogs/true … GDM-23.pdf

    That is a link to this type of unit.
    Rob.

    July 9, 2008 at 10:13 pm #257369
    kwatt
    Keymaster

    Re: True Manufacturing Co. Display drinks fridge thermostat

    whiskeyjack6058 wrote:I have been out to one of these True manufacturing Co display drinks fridges.
    This one is promoting Coca Cola and its model number is: GDM-23.
    It is in need of a thermostat as the one on it is freezing up.
    Not sure what stat I need and if its an air stat or not? I don’t think it is as the stat fitted has it’s capillary tube pushed into a thin copper tube by what seems to be the evaporator.
    The thermostat that is on it is just a normal VT9 domestic fridge stat which another engineer fitted to no avail.
    Never done one of these, would like to learn more especially considering this one is sat in my local fish and chip shop with one of my adverts hung up on the notice board
    Any advice is much appreciated!
    Thanks,
    Rob.

    It confuses awfully when you use different threads Rob, especially with the same title. 😉

    K.

    July 9, 2008 at 10:16 pm #257370
    whiskeyjack6058
    Participant

    Re: True Manufacturing Co. Display drinks fridge thermostat

    Yes, sorry about that Kwatt, I put it in here first, then decided that I wanted it to go in trade technical…..DOH…

    Rob.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.