Anybody had scrap nicked?

Home Forums General Trade Forum Anybody had scrap nicked?

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • #38119
    effzedarr
    Participant

    Well have you? We’ve had the odd scrap washer go walkies in the past but it was no big deal but last year we got kids moving scrap m/cs about after works hours & fearing some little angel getting hurt & there unconcerned parents suing us we started parking the old transit van up tight to the scrap & main wall & sticking some tall frezers at the end to stop the little b*ggers erm angels getting in & causing problems. This has been working fine for a while now as we get scrap collected when we have a sufficent amount,well the other day the bosse’s father in law borrowes the transit for the afternoon but didn’t park it back in the correct place so the following morning we discovered about 6 maybe 8 scrap washers or cookers missing but amazingly no refridgeration had been taken! All this in a small seaside town & down a back street with a private drive overlooked by other properties!!!”Theres gold in them there machines i tell ya”.

    #257771
    Dales-Electronic
    Moderator

    Re: Anybody had scrap nicked?

    Yep had 5 machines pinched a couple of months ago together with about 40 scrap compressors. Now have to lock up or workshop yard during the day and all skips (40 yarders) have chains and padlocks on them. It still didnt stop 3 men carrying away a scrap fridge freezer during the night though. Why would you pinch a scrap f/f I wonder ?? :rolls:

    #257772
    Goatboy
    Participant

    Re: Anybody had scrap nicked?

    Nope, but it is something I worry about.

    Every scrot with a van sticks his head over our (8 foot high) back gate, and then walks in the shop to ask if he can have it.

    I’m excepting it to start happening real soon :/

    #257773
    cooky
    Participant

    Re: Anybody had scrap nicked?

    We had 20 machines taken from our yard last week.Every day we have to turn away the pikeys who seem to think that all scrap thats on the floor is theirs.Its about time the EA did something about it.Funny enough though they didnt take any of the 100 fridge freezers we had in the yard.

    Regards
    Cooky…

    #257774
    roly16
    Participant

    Re: Anybody had scrap nicked?

    Well, with the value of scrap machines having gone up from 2p to 16p per kilo what do you expect? Trafford council is having to constantly replace stolen manhole covers costing us ratepayers thousands of pounds per year. The solution is to make the scrap dealers take proof of identity of all customers and details of the scrap.

    #257775
    iadom
    Moderator

    Re: Anybody had scrap nicked?

    Come on Geoff, where would you be today if you hadn’t ‘found’ that scrap fridge all those years ago. 😉 😆

    Jim.

    #257776
    Turbo
    Participant

    Re: Anybody had scrap nicked?

    Yes a friend of mine who runs a shop got some good clear pictures of Pikeys plus the van reg number, pinching his scrap M/CS, took them to show the police who were not interested 😥
    Graham

    #257777
    roly16
    Participant

    Re: Anybody had scrap nicked?

    Turbo wrote:Yes a friend of mine who runs a shop got some good clear pictures of Pikeys plus the van reg number, pinching his scrap M/CS, took them to show the police who were not interested 😥
    Graham

    They would be if he went to their camp, pinched it back, and they reported him :rolls:

    #257778
    roly16
    Participant

    Re: Anybody had scrap nicked?

    iadom wrote:Come on Geoff, where would you be today if you hadn’t ‘found’ that scrap fridge all those years ago. 😉 😆

    Jim.

    I don’t remember telling you about that, Jim, but I suppose I must have done 😀 . The difference between then and now is that I was doing Currys a favour taking it; the Manager said so. That’s my story and I’m sticking to it!

    #257779
    iadom
    Moderator

    Re: Anybody had scrap nicked?

    roly16 wrote:

    iadom wrote:
    Come on Geoff, where would you be today if you hadn’t ‘found’ that scrap fridge all those years ago. 😉 😆

    Jim.

    I don’t remember telling you about that, Jim, but I suppose I must have done 😀 . !

    At least twice Geoff, hope you had a good holiday. 8)

    Jim.

    #257780
    roly16
    Participant

    Re: Anybody had scrap nicked?

    I had an excellent holiday thanks Jim. By the way, have I ever told you how I got into this business ❓

    #257781
    don
    Moderator

    Re: Anybody had scrap nicked?

    roly16 wrote: By the way, have I ever told you how I got into this busuness ❓

    Come on then Geoff spill the beans. Iwill if you will 😉 who knows it could be start of a whole new thread 😆

    Don

    #257782
    iadom
    Moderator

    Re: Anybody had scrap nicked?

    Don’t encourage him or wait until next week when I am off for a fortnight, conversely I could relate the tale to you myself. 😛 😆


    It begins, “There was this fridge…………….” 😀

    Jim.

    #257783
    Penguin45
    Participant

    Re: Anybody had scrap nicked?

    “…….. round the back of a major retail outlet……”

    :p45:

    #257784
    roly16
    Participant

    Re: Anybody had scrap nicked?

    Well Ernie and Eric are making such a good job of it I think I’ll just let them finish it off 😆

Viewing 15 posts - 1 through 15 (of 15 total)
  • You must be logged in to reply to this topic.