siemens w/m lights on but no go

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › siemens w/m lights on but no go

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 16, 2008 at 4:14 pm #38136
    bzz67
    Participant

    WIQ1430EU/01

    SIEMENS comes up in large blue display when mains is on, apart from the odd flicker, nothing else will work. had a look around all three pcb’s etc but can’t see anything obvious. not worked on many of these so any help would be great.

    thanks

    July 16, 2008 at 8:45 pm #257828
    gegsy
    Participant

    Re: siemens w/m lights on but no go

    Hi
    If its doing that it relates to the analogue sensor being out of its operating range or connection from it to the module missing.
    If required its 182238 £23.69 + the usual.
    As if you didn’t know, they don’t click when you blow down them. Usually doing this results in permanent damage to the little guy 😀

    Greg

    July 17, 2008 at 11:29 am #257829
    bzz67
    Participant

    Re: siemens w/m lights on but no go

    thanks, i’ll give it a go.
    ps: of course i knew not to blow into it 😉 😳

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.