Hotpoint WM22 – pecker arm

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WM22 – pecker arm

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 18, 2008 at 10:05 am #38172
    MickGeorge
    Participant

    Hi folks

    After a pecker arm for the above but found out it is no longer available – it’s the inboard type that rests on the motor shaft and not on the belt.. (part no 1601775)

    Anyone done a mod on these (fit the old type as the old type are still readily availible??? as this seems one possibility)

    Any suggestions apreciated – can tie the pecker arm up so door can still be opened but obviously not a solution as door can be opened on spin and a great danger..

    Seems stupid to right of m/c just for this as m/c in good working order..

    Thanks

    Mick

    July 18, 2008 at 11:37 am #257939
    Phidom
    Participant

    Re: Hotpoint WM22 – pecker arm

    If you do fit the other type you will also need a different cable. Have you checked for pattern ones? I see Connect still list 1601699.

    July 18, 2008 at 11:38 am #257940
    bzz67
    Participant

    Re: Hotpoint WM22 – pecker arm

    yes i have got one, but i would not tie up the old one for now, its a bit dangerous.
    give me a call on 01884 254760 and will put it in the post asap

    £14.00 inc p&p

    July 22, 2008 at 3:40 pm #257941
    MickGeorge
    Participant

    Re: Hotpoint WM22 – pecker arm

    Got the arm.. thanks bzz66… One happy customer…

    Mick

    July 22, 2008 at 3:47 pm #257942
    bzz67
    Participant

    Re: Hotpoint WM22 – pecker arm

    MickGeorge wrote:Got the arm.. thanks bzz66… One happy customer…

    Mick

    No problem Mick.
    cheers

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.