Transit bolts!!

Home › Forums › Manufacturer/WP/Insurer Specific Forums › ISE Trade Support Forum › Transit bolts!!

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • July 22, 2008 at 7:48 pm #38256
    aqualectric
    Participant

    I have a customer with a Mk I ISE 2 and he has mislaid his transit bolts. He is moving about 150 miles away and I think the machine would be safer traveling with the bolts in.
    Are they the same length as new ISE 2? I don’t really want to lend him a set from a stock machine. Any suggestions?

    Steve.

    July 22, 2008 at 9:42 pm #258225
    iadom
    Moderator

    Re: Transit bolts!!

    Same bolts, same on ISE 5 mk 2 as well.

    Fairly easy to put the top two back in, didn’t bother with the bottom two on a recent uplifted machine due to perceived degree of difficulty.
    It wasn’t going far. 😉

    Jim.

    July 24, 2008 at 9:57 pm #258226
    aqualectric
    Participant

    Re: Transit bolts!!

    Thanks for the reply, Jim!! I didn’t really want to donate a set of bolts from a new machine as I may not get them back. Anyone got a spare set they could send me?

    Thanks,

    Steve.

    July 25, 2008 at 8:07 am #258227
    Del
    Moderator

    Re: Transit bolts!!

    No Probs Steve I’ll pop you a set in the post !

    😉

    Sean

    July 25, 2008 at 8:29 am #258228
    aqualectric
    Participant

    Re: Transit bolts!!

    As usual, top service from Sean!!!! :tup:

    Thanks very much – and let me know what the customer owes for them.

    Cheers,

    Steve.

    August 28, 2008 at 10:36 am #258229
    don
    Moderator

    Re: Transit bolts!!

    Installed an ISE10 on Tuesday which had no plastic covers to fit after removing the bolts. Just a one off or are they no longer supplied ❓


    Don

    August 28, 2008 at 10:41 am #258230
    kwatt
    Keymaster

    They’ve never been supplied with them Don. 😉

    I’ve no idea why that is but I’ve never seen an Asko that had them.

    K.

    August 28, 2008 at 11:26 am #258231
    don
    Moderator

    Re: Transit bolts!!

    Hey ho another senior moment :rolls: 😆

    August 28, 2008 at 11:42 am #258232
    kladave
    Participant

    Re: Transit bolts!!

    Don

    Once you take the bolts out,turn the rubber into the vertical position to fill the hole.(page 22 instruction book).

    Dave

    August 28, 2008 at 11:56 am #258233
    don
    Moderator

    Re: Transit bolts!!

    Thanks for that Dave

    Must remember to give no.1 son a slap later lol, he`s the one who prepares the new machine while I uninstall the old one.

    Don

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.