Transit bolts!!

[aqualectric]

I have a customer with a Mk I ISE 2 and he has mislaid his transit bolts. He is moving about 150 miles away and I think the machine would be safer traveling with the bolts in.
Are they the same length as new ISE 2? I don’t really want to lend him a set from a stock machine. Any suggestions?

Steve.

[iadom]

Re: Transit bolts!!

Same bolts, same on ISE 5 mk 2 as well.

Fairly easy to put the top two back in, didn’t bother with the bottom two on a recent uplifted machine due to perceived degree of difficulty.
It wasn’t going far. 😉

Jim.

[aqualectric]

Re: Transit bolts!!

Thanks for the reply, Jim!! I didn’t really want to donate a set of bolts from a new machine as I may not get them back. Anyone got a spare set they could send me?

Thanks,

Steve.

[Del]

Re: Transit bolts!!

No Probs Steve I’ll pop you a set in the post !

😉

Sean

[aqualectric]

Re: Transit bolts!!

As usual, top service from Sean!!!! :tup:

Thanks very much – and let me know what the customer owes for them.

Cheers,

Steve.

[don]

Re: Transit bolts!!

Installed an ISE10 on Tuesday which had no plastic covers to fit after removing the bolts. Just a one off or are they no longer supplied ❓

Don

[kwatt]

They’ve never been supplied with them Don. 😉

I’ve no idea why that is but I’ve never seen an Asko that had them.

K.

[don]

Re: Transit bolts!!

Hey ho another senior moment :rolls: 😆

[kladave]

Re: Transit bolts!!

Don

Once you take the bolts out,turn the rubber into the vertical position to fill the hole.(page 22 instruction book).

Dave

[don]

Re: Transit bolts!!

Thanks for that Dave

Must remember to give no.1 son a slap later lol, he`s the one who prepares the new machine while I uninstall the old one.

Don

[Author]

Posts