ZANUSSI ZWD1471S

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ZANUSSI ZWD1471S

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 24, 2008 at 10:43 am #38283
    PGS
    Participant

    Called to this m/c today for no dry fault. No fault codes in memory, and no fan motor although there was 35v to terminals, no pump, no heat only forward/reverse motor action. Any ideas guys. PS Washing m/c works 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}.

    July 24, 2008 at 4:45 pm #258324
    DentedPorsche
    Participant

    Re: ZANUSSI ZWD1471S

    Hiya,
    If there’s water coming in I’d be guessing at the dryer NTC in the condenser hose, although it should bring up an error code.

    Brian

    July 24, 2008 at 5:17 pm #258325
    PGS
    Participant

    Re: ZANUSSI ZWD1471S

    Would the faulty NTC cause only motor action. There is no water coming in on drying cycle,only on wash cycle.

    July 24, 2008 at 5:26 pm #258326
    DentedPorsche
    Participant

    Re: ZANUSSI ZWD1471S

    If there’s no water coming in then the fan shouldn’t run and the heater shouldn’t come on. However, again, it should register an error code.

    July 24, 2008 at 5:32 pm #258327
    PGS
    Participant

    Re: ZANUSSI ZWD1471S

    Brian thats exactly what is happening but display shows time to end only.

    July 24, 2008 at 7:05 pm #258328
    BobHope
    Participant

    Re: ZANUSSI ZWD1471S

    Hi Paul,

    have you checked the water soliniod valve ?
    quite a common problem.

    Bob.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.