Hygena OvenStuck on Automatic

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Hygena OvenStuck on Automatic

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 30, 2008 at 10:19 am #38400
    PGTips
    Participant

    I have a Hygena Oven Ref APL 3418 and the programmer is stuck on “Auto” Occasionally it will start to flash and when “Manual” button is pressed to reset it just jumps back to “Auto” setting.
    Is there a simple solution of bypassing “Auto” and just have the oven working on “Manual” ?

    July 30, 2008 at 10:41 am #258757
    helo_75
    Participant

    only if your good with a multimeter and can figure out which bit switches what and how

    not impossible, just a but tricky

    plug out if your gonna have a go!

    July 30, 2008 at 1:29 pm #258758
    karv
    Participant

    Re: Hygena OvenStuck on Automatic

    only like 2 to 4 wires going to most timers some live some neutral never had that fault myself. don,t think new timers are that expensive on most ovens some are tho.
    ps its not something silly like the clock or pannel have moved out of alinment and rubbing on the button keeping then pushed in ?

    July 30, 2008 at 3:13 pm #258759
    helo_75
    Participant

    Re: Hygena OvenStuck on Automatic

    karv wrote:only like 2 to 4 wires going to most timers some live some neutral never had that fault myself. don,t think new timers are that expensive on most ovens some are tho.
    ps its not something silly like the clock or pannel have moved out of alinment and rubbing on the button keeping then pushed in ?

    wow, thanks for that!!

    i can tell how many timers you’ve bought… ive changed loads of timers in my 22 years, but hey, what would i know

    July 31, 2008 at 11:06 am #258760
    PGTips
    Participant

    helo_75 wrote:only if your good with a multimeter and can figure out which bit switches what and how

    not impossible, just a but tricky

    plug out if your gonna have a go!

    Thanks
    I think it’s time to phone my brother. I’m not too good with electrics or water.

    July 31, 2008 at 11:20 am #258761
    PGTips
    Participant

    Re: Hygena OvenStuck on Automatic

    karv wrote:only like 2 to 4 wires going to most timers some live some neutral never had that fault myself. don,t think new timers are that expensive on most ovens some are tho.
    ps its not something silly like the clock or pannel have moved out of alinment and rubbing on the button keeping then pushed in ?

    Thanks for replying, unfortunately it’s not the simple answer. Nothing sticking with regards to push buttons.

    Any ideas on how to remove the whole timer if it’s viable to replace.

    Thanks again

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.