Hoover time 1400 (h104e)

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hoover time 1400 (h104e)

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • July 30, 2008 at 10:30 am #38401
    cliffyspliff
    Participant

    The drum has stopped working on the above washing machine and i wondering what my options are on what it could be?

    The washing machine fills and enpty`s of water as normal just no spin action whatsoever.

    I have checked the belt and motor brushes, which seem in good shape, there is no smell of burning and the drum turns freely when i turn it by hand.

    Im guessing its a PCB problem but how can i be sure?

    Thanks in advance…

    July 31, 2008 at 12:03 am #258762
    Penguin45
    Participant

    Re: Hoover time 1400 (h104e)

    Nothing to be found with that model number. Please re-check – better still post up the product number – the one that starts with 3——

    Penguin45.

    July 31, 2008 at 9:29 am #258763
    helo_75
    Participant

    itll be a h140e

    July 31, 2008 at 9:38 am #258764
    cliffyspliff
    Participant

    Re: Hoover time 1400 (h104e)

    Sorry about that!

    The only other number I can see on the machine is : 3100000502200402,
    its on a sticky label on the back.

    If this isnt it, on which part of the machine will I find the number?

    Many thanks

    Sean

    July 31, 2008 at 10:45 am #258765
    helo_75
    Participant

    inside the door on a sticker but that number should be enough… cue mr p45…..

    July 31, 2008 at 11:21 am #258766
    cliffyspliff
    Participant

    Re: Hoover time 1400 (h104e)

    yeah its the same number…. :rolls:

    July 31, 2008 at 11:49 pm #258767
    Penguin45
    Participant

    Re: Hoover time 1400 (h104e)

    Somewhat later than anticipated (wedding anniversary)……..

    Timer/selector machine with computer board at the top. If you are sure that the motor is fine and that you have continuity from the board to the motor, I’d be looking at the pcb itself. I have had a few recently where relay joints on the board have burnt out – soldering iron and a reinforcing wire have sorted them.

    If there is no visible evidence, the pcb its.elf may have failed.

    Power off if you intend to do this yourself.

    Penguin45.

    August 1, 2008 at 5:35 pm #258768
    cliffyspliff
    Participant

    Re: Hoover time 1400 (h104e)

    thanks for the info will check it out

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.