- This topic has 7 replies, 5 voices, and was last updated 17 years, 8 months ago by
.
-
Posts
-
i may be ploughing a lonely and long furrow here but….. customer has one of these and reports that it blows the trips…..not every time but sometimes!!! it washes and completes the programme ….water in, wash action, drain and spin…perfect…then wash rinse drain and BANG!! been twice now and checked wiring, visual inspection of all main components…can i see the wood for the trees…? NO!!!
richardRe: servis m6666
Have you checked the mains suppressor? They usually fail with a loud bang and some will even continue working while blown. 😉
HTH,
Steve.
Re: servis m6666
Have you checked that the dispenser isn’t dripping water down onto the motor. You should see slight water contamination on the carbon brush terminal.
Re: servis m6666
i agree with tim if you check for water signs on the tub under the disp and on the motor.i generally take the disp off split it and d-bore then refit and adj the water pressure i have done tonnes of these.
cheers chris.
Re: servis m6666
Be warned it may not be water, but the module and or the motor. I have been to a few of these models and have found it to be the module.
Bill 😕
- You must be logged in to reply to this topic.