Bosch tumble dryer WTS86519GB02 stopping after 5 min

This topic has 5 replies, 3 voices, and was last updated 17 years, 8 months ago by boselecta.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
August 9, 2008 at 10:53 am #38638

boselecta
Participant

Bosch tumble dryer WTS86519GB02
Visited this condenser dryer last week wasn’t draining, cleared pump and tested, now draining into tank ok.
Got a recall yesterday, appliance now tumbles and heats for 5 min then stops and goes back to the original time on the display. Customer also says appliance is getting excessively hot.

I have checked everything, any advise would be great. (also no blockages or earth leaks)

August 9, 2008 at 1:33 pm #259504

gegsy
Participant

Re: Bosch tumble dryer WTS86519GB02 stopping after 5 min

Is there adequate room ventilation, lint filter clean and condenser unit clean.
A genuine fault will usually show itself on the display and lamp flashing.

Greg

August 9, 2008 at 2:22 pm #259505

boselecta
Participant

Re: Bosch tumble dryer WTS86519GB02 stopping after 5 min

Hi Gegsy
the appliance is being opperated in the center of the room and all the filters are clear. I have cleared the appliance filters and reservoir. Also this appliance is only about 2 years old all singing and dancing with lcd display.

August 9, 2008 at 2:37 pm #259506

gegsy
Participant

Re: Bosch tumble dryer WTS86519GB02 stopping after 5 min

You have mail, may help 😉
Maybe worth checking the connection from the module to the sensors embedded in front manifold.
If thats ok I would say module, I had a brand new do the same fault.
Just remembered about that sorry :rolls:

Greg

August 9, 2008 at 2:39 pm #259507

helo_75
Participant

agreed, ive had 2 of those doing that, both module fault

August 9, 2008 at 3:06 pm #259508

boselecta
Participant

Will go back next week and have another look, will take service manual along this time. thanks again
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.