Drum bearings on WDM 130 01 Hoover

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Drum bearings on WDM 130 01 Hoover

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • August 10, 2008 at 11:29 am #38654
    Bramley
    Participant

    Hi…..can anyone please tell me if it is possible to replace the drum bearings on my washer/dryer.

    It’s very noisy and hubby thought he would replace the bearing/s before it gets too bad… but having trouble getting the spider? off the back…….

    Thank you for any advice

    Bramley

    August 10, 2008 at 12:08 pm #259543
    helo_75
    Participant

    youll have to be more specific?

    has he stripped it down already ( sounds like he has )

    just how far has he got?

    August 10, 2008 at 12:12 pm #259544
    Bramley
    Participant

    Re: Drum bearings on WDM 130 01 Hoover

    Thanks for replying helo ….. he’s now got the back off the machine and the pulley wheel off…….

    Bramley

    August 10, 2008 at 12:37 pm #259545
    Bramley
    Participant

    Re: Drum bearings on WDM 130 01 Hoover

    helo….. he is trying to explain to me …. that all he wants to know is … how to get the spindle out with the bearing on ….. does he need a hammer drawer? (if that’s how you spell it).

    Bramley

    August 10, 2008 at 12:58 pm #259546
    Penguin45
    Participant

    Re: Drum bearings on WDM 130 01 Hoover

    Entire tub assembly must be removed from cabinet, then tub front off to allow the shft to be driven out. Then you can get at the bearings……..

    Penguin45.

    August 10, 2008 at 1:08 pm #259547
    Bramley
    Participant

    Re: Drum bearings on WDM 130 01 Hoover

    Thanks Penquin ….. that’s what he was afraid of ……. never mind…….another all day job…..

    Thanks again
    Bramley

    August 10, 2008 at 3:56 pm #259548
    Penguin45
    Participant

    Re: Drum bearings on WDM 130 01 Hoover

    You’ll need THESE when you’ve got it all apart.

    Penguin45.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.