Servis M9150W Washer Dryer plastic chamber required

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Servis M9150W Washer Dryer plastic chamber required

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 19, 2008 at 8:32 pm #38862
    whiskeyjack6058
    Participant

    Went out to one of these as it was reported leaking. On inspection, I found a hair line crack on a large white plastic chamber that runs up the front right side of the machine about 3/4 of the way up. It connects to the pump. I’m not sure what it does, but it’s the route of the leak. It had been smashed by the lower concrete weight so it must have happened before to someone I’m sure.
    Unable to find it on connect distribution…
    Help please.
    Thanks in advance.
    Robert.

    August 19, 2008 at 9:15 pm #260202
    lerch
    Participant

    Re: Servis M9150W Washer Dryer plastic chamber required

    The white plastic pipe from the pump go’s upto the pressure pipe / switch ❓ if so all it is, is a air chamber to feed pressure upto the pressure switch.

    August 19, 2008 at 11:20 pm #260203
    Penguin45
    Participant

    Re: Servis M9150W Washer Dryer plastic chamber required

    356004600 – “non-overflow hose”.

    It’s a box section running up the front right corner of the casing.

    Chris.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.