aeg washer dryer L16830

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › aeg washer dryer L16830

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • August 19, 2008 at 8:59 pm #38867
    suedehead1
    Participant

    hi,
    this machine looks very much like the zanussi washer dryer.

    the machine works perfectly on wash but not on dryer,
    the fan motor goes, the water goes into the condenser the thermostats and thermistor are ok the heaters are ok.

    however there is no heat i suspect the pcb anyone else had this problem and can anybody give me a ballpark figure for the pcb.

    thanks in advance

    August 19, 2008 at 9:09 pm #260209
    lerch
    Participant

    Re: aeg washer dryer L16830

    daft question do you have power to the elements ???

    August 19, 2008 at 9:18 pm #260210
    suedehead1
    Participant

    Re: aeg washer dryer L16830

    thanks for the reply,
    yes there is electricity going to the elements.

    August 19, 2008 at 9:31 pm #260211
    lerch
    Participant

    Re: aeg washer dryer L16830

    If your getting power to elements during drying cycle that would say that the pcb is ok but your elements or stats are at fault. Are you getting a live and netural feed ?

    August 19, 2008 at 9:39 pm #260212
    suedehead1
    Participant

    Re: aeg washer dryer L16830

    there is only a live feed,

    i checked the thermostats and they were all ok.

    August 19, 2008 at 9:40 pm #260213
    lerch
    Participant

    Re: aeg washer dryer L16830

    So you have lost a netural somewhere from the pcb or on the circuit jump a netural across and see if works and go form there. 😀

    August 19, 2008 at 10:03 pm #260214
    suedehead1
    Participant

    Re: aeg washer dryer L16830

    thanks for the reply i will try it tommorrow.

    August 20, 2008 at 6:45 pm #260215
    suedehead1
    Participant

    Re: aeg washer dryer L16830

    connected up neutral and it heated ok,
    i assume this means the pcb is faulty, anyone khow ballpark price,
    thanks.

    August 20, 2008 at 6:53 pm #260216
    Turbo
    Participant

    Re: aeg washer dryer L16830

    Check the condenser valve coil and check the thermistor that is mounted in the condenser tank to tub hose. Wire to thermistor some times breaks.
    Graham

    August 20, 2008 at 7:11 pm #260217
    suedehead1
    Participant

    Re: aeg washer dryer L16830

    check them all thanks all were ok.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.