- This topic has 2 replies, 2 voices, and was last updated 17 years, 7 months ago by
.
-
Posts
-
Hi
i am hoping to get some help with the dishwasher above.
Recently i started the dishwasher before going out. When i returned later in the day, i found that it had stuck at the beginning of its program, with the motor still going and there was a slight burning smell.
After investigating i found that the waste pipe was blocked as well as the pipework it was connected to, located behind the left hand side panel. I have cleared all of the blockages and the machine seems to work again but the only problem i have now got is that there is some standing water left above the filter when the machine has completed its cycle. I have removed the impeller cover underneath the filter to look for any obstacles but have found nothing.
Any suggestions very much appreciated ❓
Thanks
MikeRe: Bosch Exxcel not draining properly when wash has finishe
I have come across examples where foreign bodies have lodged in the matrix under the left hand side panel.
Model number would help……..
Penguin45.
Re: Bosch Exxcel not draining properly when wash has finishe
Hi,
The type no. is S9G1B and i think that the model number is SGS43A12/27.
The matrix was badly blocked up originally but it appears to be clear now. Is it normal for a certain amount of water to stay in the matrix after the machine has finished its wash?Thanks
Mike
- You must be logged in to reply to this topic.