- This topic has 6 replies, 3 voices, and was last updated 17 years, 7 months ago by
.
-
Posts
-
FD841120062
Not seen dryer yet but want to be armed with some info.
Customers says dryer is beeping and the filter light is staying on.
Any advise will be warmly accepted.
Any tech info available??
Re: WTE6920gb/04
Been to see dryer earlier today. (Tested with full wet load).
Actual fault: dryer selects as normal and turns on as normal.
After 2/3 minutes the dryer beeps intermittantly, the ‘time to go’ display drops to 8 minutes and drum rotation continues. The filter light comes on as well. ( If I left the dryer running it looks like it would countdown from eight to zero).I checked for blockages, all ok. I’m getting a circuit through both elements. Pickups on the drum cleaned and continuity checked to connector on PCB.
Anyone had this fault before? Some technical data would be appreciated.
Many thanks.
Re: WTE6920gb/04
8 mins to go means it has gone into default cool down so I would suspect the temp control NTC in the front duct is playing up or the air flow around it compromised maybe?
You can check the NTC value directly off its plug-in connector on the main module. 😉
- You must be logged in to reply to this topic.