Servis Washer M6006 – No Power

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Servis Washer M6006 – No Power

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 21, 2008 at 10:46 am #39634
    coda2
    Participant

    Symptoms – Machine won’t operate on any program and front neon not illuminated!

    Fault Finding – Checked plug fuse, internal filter, washer ON/OFF switch and the electrical operated door switch interlock. All power and necessary interlocks to perform at least a spin cycle are present.
    Have looked at posts here for other Servis washers and the pcb appears to be the culprit!

    Any help would be greatly appreciated.

    Regards

    Mike

    September 21, 2008 at 8:01 pm #263027
    suedehead1
    Participant

    Re: Servis Washer M6006 – No Power

    sounds like the pcb plug out please.

    September 21, 2008 at 8:46 pm #263028
    helo_75
    Participant

    landfill

    September 22, 2008 at 3:50 pm #263029
    coda2
    Participant

    Re: Servis Washer M6006 – No Power

    Thanks for the feedback and appreciate the economics for the washer going in landfill it’s a no brainer – but to someone of limited income then a different approach is needed.

    I volunteered my services to an elderley neighbour who hasn’t a lot of money – as the washer is 2 years old I’ll obtain a new pcb from Dave for £80

    Thanks

    Mike

    September 23, 2008 at 5:10 pm #263030
    Lawrence
    Participant

    Re: Servis Washer M6006 – No Power

    Be Careful, you may spend £80 on a PCB and find something caused it to blow in the first place ..
    I know it’s only two years old but you could end up throwing a lot of money at it .

    Lawrence

    September 23, 2008 at 11:10 pm #263031
    cockney steve
    Participant

    Re: Servis Washer M6006 – No Power

    I’d concur with lawrence’s comments….have you checked the heater , motorand pump are all OK? no internal shorts? not leaking to earth?

    If money’s that tight, consider an older machine which is designed to be mendable, from a charity shop/recycling centre.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.