LG WM1480FHD

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › LG WM1480FHD

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • September 23, 2008 at 5:41 pm #39704
    clivejameson
    Participant

    This one has really got me stumped….

    The clockwise motor action is rough and the anticlock is non-existant it simply locks the drum in a stationary position. The machine displays the error ‘LE’ after a minute or two, this should be a ‘Lock Error’ (door lock or wiring).

    Having checked the wiring from the lock to the pcb ok I replaced the door lock which didn’t sort it, so I bit the bullet and replaced the pcb itself but still no joy.

    Anyone else come across this fault…and if so what was the solution?

    September 23, 2008 at 5:50 pm #263288
    smartin
    Participant

    Re: LG WM1480FHD

    check for chaffed wires from stator against the base where cable ties are. i have had this cause exactly that problem.

    September 23, 2008 at 5:51 pm #263289
    BobHope
    Participant

    Re: LG WM1480FHD

    Hi

    its the hall effect switch on the motor that causes this fault, complete motor required im afraid. LE is a motor locked error and nothing to do with the door lock that one is DE error code.
    check the motor wiring as this will give the same error code but i have also had the pcb cause the problem.


    Good luck Bob.

    September 23, 2008 at 5:53 pm #263290
    clivejameson
    Participant

    Re: LG WM1480FHD

    Thanks for the speedy reply Bob 😀

    Bryan…can you edit the fault codes??

    http://www.ukwhitegoods.co.uk/modules.p … topic&t=40


    Lucky Goldstar

    September 23, 2008 at 7:18 pm #263291
    admin
    Keymaster

    Re: LG WM1480FHD

    Hi Clive

    LE is a load error caused by uneven loading of the machine.

    Clive I didnt post those up it was Dave conway who mis typed.

    Bryan

    September 23, 2008 at 7:59 pm #263292
    Penguin45
    Participant

    Re: LG WM1480FHD

    Which one is it, guys? Motor lock or OOB? UE is supposed to be OOB according to the post.

    Chris.

    September 24, 2008 at 5:07 am #263293
    bigsmokepiker
    Moderator

    Re: LG WM1480FHD

    LE -lock ERROR
    Usually Hall Sensor /Broken Wiring

    UE – Imbalance Error

    Sensor Down here is Part # 6501KW2001A (About $15.00AUD)

    September 24, 2008 at 7:35 am #263294
    bzz67
    Participant

    Re: LG WM1480FHD

    good to see the sensor is now available on its own, the last time i fitted one, it came complete stator.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.