LG WM1480FHD

[clivejameson]

This one has really got me stumped….

The clockwise motor action is rough and the anticlock is non-existant it simply locks the drum in a stationary position. The machine displays the error ‘LE’ after a minute or two, this should be a ‘Lock Error’ (door lock or wiring).

Having checked the wiring from the lock to the pcb ok I replaced the door lock which didn’t sort it, so I bit the bullet and replaced the pcb itself but still no joy.

Anyone else come across this fault…and if so what was the solution?

[smartin]

Re: LG WM1480FHD

check for chaffed wires from stator against the base where cable ties are. i have had this cause exactly that problem.

[BobHope]

Re: LG WM1480FHD

Hi

its the hall effect switch on the motor that causes this fault, complete motor required im afraid. LE is a motor locked error and nothing to do with the door lock that one is DE error code.
check the motor wiring as this will give the same error code but i have also had the pcb cause the problem.

Good luck Bob.

[clivejameson]

Re: LG WM1480FHD

Thanks for the speedy reply Bob 😀

Bryan…can you edit the fault codes??

http://www.ukwhitegoods.co.uk/modules.p … topic&t=40

Lucky Goldstar

[admin]

Re: LG WM1480FHD

Hi Clive

LE is a load error caused by uneven loading of the machine.

Clive I didnt post those up it was Dave conway who mis typed.

Bryan

[Penguin45]

Re: LG WM1480FHD

Which one is it, guys? Motor lock or OOB? UE is supposed to be OOB according to the post.

Chris.

[bigsmokepiker]

Re: LG WM1480FHD

LE -lock ERROR
Usually Hall Sensor /Broken Wiring

UE – Imbalance Error

Sensor Down here is Part # 6501KW2001A (About $15.00AUD)

[bzz67]

Re: LG WM1480FHD

good to see the sensor is now available on its own, the last time i fitted one, it came complete stator.

[Author]

Posts