neff S5555XOGB/55 door wont close

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › neff S5555XOGB/55 door wont close

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 25, 2008 at 8:17 pm #39757
    monkey
    Participant

    Hi Guys
    Can you help with this one. The customers son stood on the door and now the door wont close. I have looked on neffs website but I dont know which parts off the hinge to order. Have you come across this before, if so which parts shall I order.

    September 25, 2008 at 8:40 pm #263485
    nomadPaul
    Participant

    99 times out of a 100 , it won’t be the hinge . It’ll be a bent inner door panel. I’ve done numerous faults like this when the customer or their kids have stood or fallen on the door . Look at the lower door corner edges where the hinges are screwed in – You’ll probably find it bent out of shape at that point. You could try re-forming it but i’ve never been successful . Always had to replace the inner door panel .

    September 26, 2008 at 7:43 pm #263486
    goosegreen
    Participant

    Re: neff S5555XOGB/55 door wont close

    Timely post Paul, Going to a call tomorrow and apparently one of the kids had climbed onto the work top and fell off on to the Neff D/W door. I would have suspected hinges but will have a good look at the inner door.


    Cheers

    Goose

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.