IGNIS ADL347 8 FLASH ERROR

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › IGNIS ADL347 8 FLASH ERROR

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 9, 2008 at 9:04 am #40083
    lornam
    Participant

    Hi

    Can you tell me what this error is and how to fix it?
    Thanks ❓

    October 9, 2008 at 10:31 am #264694
    lornam
    Participant

    Re: IGNIS ADL347 8 FLASH ERROR

    Have tried these both are ok

    Water level control failure. Two possibilities.

    1/ Easy one. Pull the filters and look into the sump, find the black grille at the 3 o’clock position. This is the water level indicator; it fills with fatty congealed deposits and can jam the mechanism. A vigorous attack of hot water and toothbrush may get it working again. It’s possible that the microswitch has failed. The unit is a twist fit from underneath if you need to remove it. Power off, first.

    2/ More complex. The flow meter in the fill matrix under the left hand side panel is not signalling. The usual problem is the connector to the little pcb. Removing it and cleaning the contacts, as well as giving the connector a good pinch will often get things going again.

    Hope this helps
    Thanks again

    October 9, 2008 at 10:33 am #264695
    lornam
    Participant

    Re: IGNIS ADL347 8 FLASH ERROR

    It flashes till the door closes then when the door shuts it beeps could this be the PCB?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.