Indesit WIL133 uk(TEV)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit WIL133 uk(TEV)

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • October 13, 2008 at 12:59 pm #40171
    eastlmark
    Moderator

    got a faulty module on this Indesit WIL133 uk(TEV) washing machine, ordered new module C00143056 and eeprom C00194074 from Indesit as per info on the latest partfinder disc only to be informed that the pcb was now obsolete and no alternative was sent(although helpfully they still supplied the eeprom!)
    An enquiry to connect confirmed that the new part number as C00254297 which was ordered but on inspection has no socket for the eeprom. An enquiry to Indesit said that it was already programmed, no eeprom required……of course I fitted it and it now has all the symptoms of an unprogrammed board. Have reported back to Indesit and awaitng reply.
    Is this a board that requires the smart card to programme? If so where is the part number for the card?
    Indesit, I would give up had it not been a letting agents job.

    October 13, 2008 at 1:06 pm #265005
    bzz67
    Participant

    Re: Indesit WIL133 uk(TEV)

    thats why i always go to EMW for all that type of pcb, a lot less hastle.

    October 13, 2008 at 3:13 pm #265006
    iadom
    Moderator

    Re: Indesit WIL133 uk(TEV)

    AFAIK, which is very little in this instance, I thought the card came with the new board, you will however need a card reader to programme the board. not to sure but I was quoted around £100+ for the card reader. :rolls:

    Jim.

    October 13, 2008 at 3:28 pm #265007
    bzz67
    Participant

    Re: Indesit WIL133 uk(TEV)

    connections sell the reader 5045174354899 for £52.14 +vat

    October 13, 2008 at 3:38 pm #265008
    helo_75
    Participant

    and then youll need a card

    not cheap, is it

    October 13, 2008 at 3:46 pm #265009
    iadom
    Moderator

    helo_75 wrote:and then youll need a card

    not cheap, is it

    So is it not supplied with the board???

    October 13, 2008 at 5:05 pm #265010
    helo_75
    Participant

    nope.. that board directly replaces tthe c00143056, and fits a mulitude off machines, its the same as needing an eprom, effectively

    scam of the decade

    October 13, 2008 at 5:15 pm #265011
    helo_75
    Participant

    C00262380

    is the number for the smart card

    October 13, 2008 at 5:28 pm #265012
    eastlmark
    Moderator

    Re: Indesit WIL133 uk(TEV)

    Thanks Halo, and yes, I have had he card reader sitting in my van for several months now and not yet had a instance to use it yet. Would have thought this may have been mentioned on the latest partfinder or at least a slip of paper in the box telling us that.
    anyone need a good old fashioned eeprom C00194074 I have one to spare!

    any idea how much the card is? no doubt will have to pay £5 transport cost as well. Part number not recognised on partfinder or connect.

    October 13, 2008 at 5:36 pm #265013
    eastlmark
    Moderator

    Re: Indesit WIL133 uk(TEV)

    by the way, have had a reply from Indesit:


    😆 😆 😆 😆

    I would suggest you call our Service centre on 08709 066 066, and get a engineer out.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.