replacing an inlet hose for Zannussi 1250

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › replacing an inlet hose for Zannussi 1250

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • October 13, 2008 at 3:45 pm #40177
    mothona
    Participant

    Hi,
    I’d like you to give me the advice on replacing an inlet hose for Zannussi 1250.
    I discovered the leak from the connector of cold water hose (connecting the washer and the cold water pipe under the kitchen sink).
    I tuned the stop cock (or valve with handle?) near the connector and the leak stopped, but I guess I’m not able to use the washer until I replace the inlet hose.
    I found the spare hose on line, but I have no experience of installing the washer myself, and I am wondering if I can replace the hose by myself or I should ask a plumber to do it.
    Please give me any advice on what I should do so that I can use the washer again ASAP!
    Thank you for your help.

    October 13, 2008 at 5:21 pm #265025
    helo_75
    Participant

    unscrew it at either end, take it off.. screw new one back on

    simplest job in the world

    October 13, 2008 at 6:13 pm #265026
    mothona
    Participant

    Re: replacing an inlet hose for Zannussi 1250

    Wah!!!
    Thank you so much helo_75,
    I’ve been suffering for my ignorance.
    Very kind of you to reply.

    October 13, 2008 at 6:19 pm #265027
    helo_75
    Participant

    have you even tried tightening up the hose thats on? that may be all it needs?

    October 13, 2008 at 6:49 pm #265028
    mothona
    Participant

    Re: replacing an inlet hose for Zannussi 1250

    I haven’t…. I will try that first, before I buy a new hose.

    Thank you again helo_75,
    I appreciate your thoughtful advice.

    October 13, 2008 at 7:03 pm #265029
    helo_75
    Participant

    im only trying to help

    October 13, 2008 at 7:15 pm #265030
    mothona
    Participant

    Re: replacing an inlet hose for Zannussi 1250

    Surely, you brightened up my day!

    October 20, 2008 at 7:17 pm #265031
    mothona
    Participant

    Re: replacing an inlet hose for Zannussi 1250

    Hi helo_75,
    I was able to fix the problem without buying a new hose, thanks to your advice.
    I appreciate your help!
    Thank you.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.