ignis ADL347 854534715410 Fills then empties

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ignis ADL347 854534715410 Fills then empties

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 16, 2008 at 9:09 pm #40266
    alro
    Participant

    Hi gents
    Need help have an adl347 fills then empties no motor action error fault is 1&2 flashing flow meter faulty spins ok checked connectors & cables to pcb ok tested water indi in base of sump plus connection all ok pcb looks fine .Customer used dishwasher went away for 2 weeks this fault happened on 1st use of return any ideas suspect lower pcb
    cheers alro

    October 17, 2008 at 12:07 am #265366
    Penguin45
    Participant

    Re: ignis ADL347 854534715410 Fills then empties

    1+2 flashing is not a fault code…… The pattern of the flashing start led is a code – ie, 1-2-3-4-pause, repeat.

    Chris.

    October 17, 2008 at 3:15 am #265367
    admin
    Keymaster

    Re: ignis ADL347 854534715410 Fills then empties

    Hi

    Has the base gort water in it ?,Common problem that the hose perishe’s and then leaks.The appliance will the operate the anti flood and pump out.

    Bryan

    October 17, 2008 at 5:17 pm #265368
    alro
    Participant

    Re: ignis ADL347 854534715410 Fills then empties

    CHRIS & BRYAN
    thanks for reply flashing 1&2 is the code for flow switch fault as per sios disc f5 no pause bryan the base looks as thou its came out of a show room new no leaks, have taken side chamber off and flow switch spins ok seems to be like new does any body how to test the switch. WI switch makes 1to3 empty then with water in 1to2
    cheers alro

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.