De Dietrich vz994641/1 cutting out

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › De Dietrich vz994641/1 cutting out

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 30, 2008 at 3:51 pm #40632
    Johnnyboy
    Participant

    Hi Chaps I have a D/W that works for 13 mins heating upto 43 degrees then stops, the lights on the top of the door go out and nothing happens for 5 mins then the pre wash light comes on ready to do the same thing again. Is there a safety cutout that cuts power to the board I am missing?
    Cheers Johnnyboy

    October 30, 2008 at 5:03 pm #267077
    Lawrence
    Participant

    Re: De Dietrich vz994641/1 cutting out

    if its the one I think it is there is a cutout on top of the heater tank ,but its more likely to be a broken door wire
    Lawrence

    October 30, 2008 at 5:07 pm #267078
    admin
    Keymaster

    Re: De Dietrich vz994641/1 cutting out

    Hi

    If you have a partial blockage this may cause the thermal over temp to cut out and then reset,normally cause by scale build up or sludge.

    or broken wire ..as i didnt look at the top board cutting out also.

    Bryan

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.