diplomat / servis type w/m

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › diplomat / servis type w/m

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 30, 2008 at 7:31 pm #40642
    hilly
    Participant

    apm8552/2 i got called to this mod customer reported no drain/spin, i removed blockage from drain hose and found pcb tracks burnt out, so i fitted pcb from emw (dmpdc) but still no spin, then found both carbons stuck in their housings so i freed them. now it washes ok but when it gets to the spin it gets just past the bit where it pauses , starts to pick up speed then just shuts off pump and motor action but the timer keeps clicking away??????? im now thinking motor at fault?????? but this is gonna be costly motor & pcb..(ive tightend pcb connections)

    any advice welcome
    ta paul

    October 30, 2008 at 7:34 pm #267102
    eastlmark
    Moderator

    Re: diplomat / servis type w/m

    Have you waited after the pause? these machines mess about for ages before they spin. Would suspect a timer or module fault rather than motor.

    October 30, 2008 at 9:47 pm #267103
    hilly
    Participant

    Re: diplomat / servis type w/m

    yes it got past the pause then it stops as it starts to pick up speed , seems strange how the pump and motor both stop, guess i will get a cost on timer first,

    cheers paul

    October 31, 2008 at 12:28 am #267104
    Penguin45
    Participant

    Re: diplomat / servis type w/m

    All the timer does is operate the door lock; the selected switch combination programmes the computer. The fault is not “logical”, therefore the problem is the PCB.

    If you use EMW, the boards are actually affordable – the “546…….” number is all you need.

    Chris.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.