MIELE G638 Overfilling

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › MIELE G638 Overfilling

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 30, 2008 at 9:17 pm #40647
    monkey
    Participant

    Hi Guys
    I have asked you about this before. I have still not managed to fix it.
    It fills up and starts to wash, but the water does not cut off, I have noticed it as 2 pressure switches. Can you help?

    October 31, 2008 at 12:25 am #267115
    Penguin45
    Participant

    Re: MIELE G638 Overfilling

    Well, one of the two switches is either blocked or failed, surely? If I remember correctly, one is a low pressure level switch, the other is a high pressure one spurred off the circulation pump. The low pressure one starts the pump, the high pressure one stops the fill. The old Philips ones use to use a similar system – tried to pressurise the little one and went very red in the face before I figured it out.

    Chris.

    November 24, 2008 at 9:56 pm #267116
    monkey
    Participant

    Re: MIELE G638 Overfilling

    thanks.
    I called back and checked pressure switches, they seem be ok. what I have noticed is that it starts to fill as soon as you power the dishwasher up.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.