- This topic has 3 replies, 2 voices, and was last updated 17 years, 5 months ago by
.
-
Posts
-
No start. Door open light stays on. Fitted 4 tag d/int – no difference. Assume that the board on the right hand side has failed? Motor brushes are down but not finished, heater is OK.
Ta muchly,
Chris.Re: Beko WMA765S a/w
No neutral to lock? > examine board for burnt tracks?
Is it just coincidence that board is only 3rd in connect’s list for this model?
Mike.Re: Beko WMA765S a/w
Nah, checked the board. Am getting 240v on two wires – not sure what no. 4 does though.
My account with Connect has long since expired – just don’t have the time to check the price of every single component I need, let alone argue about it.
Chris.
Re: Beko WMA765S a/w
Penguin45 wrote:Door open light stays on.
I assume you mean the door doesn’t lock.
If so, 2 x 240 sounds like one too many. I’d open the old interlock and find out which wire was meant to be neutral, assuming switching is on live side. If one of your 240 should be 0 then follow that wire back to board.
But I suppose with a huge workload like yours it’s easier just to order up the board (£30+) and try it. 🙂 Terminal 4 is probably to do with door open light, like on Zanussi but in reverse.
Mike.
- You must be logged in to reply to this topic.