Hotpoint WF541

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WF541

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 7, 2008 at 11:09 pm #40852
    Mully
    Participant

    Hi all,
    Can anyone help, I’ve been out to a Hpt WF541 today, fault code F03 (3rd & 4th lights) NTC fault.

    Checked Thermistor,wiring and mod connections, all OK.

    Tested M/C, as soon as starts F03 fault. But also fills and empties at same time, even on spin!

    Swapped mod for a S/H one put on spin did same.

    Thanks, John

    November 8, 2008 at 8:38 am #267785
    nelson
    Participant

    Re: Hotpoint WF541

    Hi John, I’ve had one like this before, I replaced the NTC which was faulty, but still got the same fault code and filling and emptying at the same time. I replaced the module with one from EMW and tightened the connections. That did the trick for me. good luck.

    November 8, 2008 at 10:03 am #267786
    Mully
    Participant

    Re: Hotpoint WF541

    Nelson,
    Thanks for your reply, I will get a recon mod from EMW and try that.
    John

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.