Zanussi T/D Model TC7102

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi T/D Model TC7102

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 12, 2008 at 8:32 am #40968
    Alanj
    Participant

    Hi Guys,

    above tumble dryer won’t start. On/off neon dimmly lit but goes bright when on/off switch pressed but no start. Switch is ok. If the cutouts on the heater on this dryer go o/c, does this stop it from starting completely.
    i.e. no motor action? 😕

    Alan

    November 12, 2008 at 9:37 am #268214
    helo_75
    Participant

    no, but the float switch stuck does 😉

    November 12, 2008 at 11:04 am #268215
    Alanj
    Participant

    Re: Zanussi T/D Model TC7102

    Thanks Helo_75, that’ll be a srtip down job then?

    Alan

    November 12, 2008 at 11:28 am #268216
    bazza500
    Participant

    Re: Zanussi T/D Model TC7102

    The float switch is easily accessible from the lower rear panel where the motor pulley is.

    One screw and panel is off. no need for major strip down.

    November 12, 2008 at 7:23 pm #268217
    Alanj
    Participant

    Re: Zanussi T/D Model TC7102

    Hi Bazza,

    no small back panel on this one. Large banjo cover on back to get into heater, then whole back panel off. 🙁

    Alan

    November 12, 2008 at 7:38 pm #268218
    timdowning
    Participant

    Re: Zanussi T/D Model TC7102

    Have you checked the front switch which the condenser cover operates?

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.