- This topic has 5 replies, 5 voices, and was last updated 17 years, 4 months ago by
.
-
Posts
-
Smeg 101045 UKSTX 1-1 103063 dishwasher. Fitted a mouse eaten drain hose today. Now on second wash customer is repoting E1 error. Any ideas chaps?
Geoff
Re: Smeg dishwasher E1 fault
hi im sure e1 on that machine is anti flood device activated (mouse poss eaten anouther pipe??)
hope that helps darrenRe: Smeg dishwasher E1 fault
water in the tray, you did dry it out I assume? if so then I am affarid you have a leak…or the mouse has feasted on the polystyrene float!
Re: Smeg dishwasher E1 fault
From the Known Error Codes thread. 😉
E1 – 1st flashing, 5th lit – flood protection system activated.
E2 – 2nd flashing, 5th lit – safety pressure switch activated.
E3 – 1st, 2nd flashing, 5th lit – no heat in time allowed.
E4 – 3rd flashing, 5th lit – temperature sensor fault.
E5 – 1st, 3rd flashing, 5th lit – no fill.
E6 – 2nd, 3rd flashing, 5th lit – no drain in time allowed.
E7 – 1st, 2nd, 3rd flashing – flow meter detected when not fitted – reset required.
E9 – same code as E1, so how you tell the difference is beyond me, but is a related fault to E1 + E2.I had an Indesit dishwasher with same fault yesterday, the plastic drain hose was completely chewed in half, the culprit was lying dead under the machine when I tipped it up. It must have swallowed a load of the plastic or something.
Jim.
- You must be logged in to reply to this topic.