zanussi zwf1010w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi zwf1010w

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 20, 2008 at 7:00 pm #41193
    tedd
    Participant

    hi all.got a call to above machine,the door locks pump starts to run for approx 3secs then cuts out and nothing else happens.anyone any ideas regards tedd.

    November 20, 2008 at 7:26 pm #269095
    funkyboogy
    Participant

    Re: zanussi zwf1010w

    MORE THAN LIKELY THE PCB,

    watch out as it may have been another component thats taken in out,
    have a look at pcb , if tracks blown trace wiring connector where tracks blown to what ever component it runs to ?this normally gives you an indication of where to look for faulty component,

    top breather hose comes loose causing water to leak onto pump, pumps then takes out pcb..

    may be lucky and its just pcb failure, but defo worth taking a good look

    ally

    November 23, 2008 at 3:52 pm #269096
    Minge
    Participant

    Re: zanussi zwf1010w

    Possibly the recirculation pump.

    November 23, 2008 at 6:01 pm #269097
    alro
    Participant

    Re: zanussi zwf1010w

    try cold water valve
    alan

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.