Diplomat Servis 8512 no volts to drain pump

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Diplomat Servis 8512 no volts to drain pump

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 25, 2008 at 1:03 am #41297
    Simon46
    Participant

    This one has had inlet hose water leak onto floor so everything covered in condensation. would this be from a module fault (DMPA1000) or could it be timer. Heater is ok.

    S.

    November 25, 2008 at 1:21 am #269464
    Penguin45
    Participant

    Re: Diplomat Servis 8512 no volts to drain pump

    Only direct timer function is to lock the door. Otherwise, it’s a selector switch. No volts to pump is a module fault.

    Chris.

    November 25, 2008 at 8:09 am #269465
    Simon46
    Participant

    Re: Diplomat Servis 8512 no volts to drain pump

    Will EMW it. Many thanks Chris

    S.

    November 27, 2008 at 8:47 am #269466
    Simon46
    Participant

    Re: Diplomat Servis 8512 no volts to drain pump

    Module it was. 😀

    S.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.