Whirlpool DW ADP4501/5WH No start

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool DW ADP4501/5WH No start

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 26, 2008 at 1:10 pm #41343
    Bernie
    Participant

    ADP4501/5WH pnc 851150415829 switch on any program all you here is a click which comes from the control board and nothing else no lights.
    I guess its a new board.
    Before posting this I did a search on this web site, and found that there is more than one control board for this machine. The two I found on Connection site are 481221838363 control board (UCB) EBL/SAM and
    481221838364 control board

    Is it the board if so which one and will it need programming and how?

    Thanks

    Bernie

    November 26, 2008 at 2:42 pm #269588
    johnmac11
    Participant

    Re: Whirlpool DW ADP4501/5WH No start

    If there are two boards listed then the one that says “sam” is a blank board. Order the other and it should come programmed.

    John

    November 26, 2008 at 3:00 pm #269589
    Bernie
    Participant

    Re: Whirlpool DW ADP4501/5WH No start

    Thanks for the info John

    November 28, 2008 at 6:15 pm #269590
    Bernie
    Participant

    Re: Whirlpool DW ADP4501/5WH No start

    Could anybody confirm that it is the board that is at fault.

    I do not want to order one as I am not sure.

    Thanks for looking

    Bernie

    November 29, 2008 at 3:01 pm #269591
    johnmac11
    Participant

    Re: Whirlpool DW ADP4501/5WH No start

    It could be a fill problem caused by either the water valve or drain pump being o/c. Or it could be a faulty door switch.
    If not it will probably be the PCB


    John

    November 29, 2008 at 5:54 pm #269592
    Bernie
    Participant

    Re: Whirlpool DW ADP4501/5WH No start

    Thanks Johnmac11 it will give me something at look at before I order a new board.

    Bernie

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.