Whirlpool DW ADP4501/5WH No start

[Bernie]

ADP4501/5WH pnc 851150415829 switch on any program all you here is a click which comes from the control board and nothing else no lights.
I guess its a new board.
Before posting this I did a search on this web site, and found that there is more than one control board for this machine. The two I found on Connection site are 481221838363 control board (UCB) EBL/SAM and
481221838364 control board

Is it the board if so which one and will it need programming and how?

Thanks

Bernie

[johnmac11]

Re: Whirlpool DW ADP4501/5WH No start

If there are two boards listed then the one that says “sam” is a blank board. Order the other and it should come programmed.

John

[Bernie]

Re: Whirlpool DW ADP4501/5WH No start

Thanks for the info John

[Bernie]

Re: Whirlpool DW ADP4501/5WH No start

Could anybody confirm that it is the board that is at fault.

I do not want to order one as I am not sure.

Thanks for looking

Bernie

[johnmac11]

Re: Whirlpool DW ADP4501/5WH No start

It could be a fill problem caused by either the water valve or drain pump being o/c. Or it could be a faulty door switch.
If not it will probably be the PCB

John

[Bernie]

Re: Whirlpool DW ADP4501/5WH No start

Thanks Johnmac11 it will give me something at look at before I order a new board.

Bernie

[Author]

Posts